Starter-Motor-Armatue-Testing-Machine

Product Description

Starter Motor Armatue Testing Machine

Starter Motor Armatue Testing Machine

This armature testing machine is a fully automatic machine for armature performance testing. All the test quality report can be generated and printed.Machine has various testing options available to do testing.

This starter armature tester WIND-ATS-02 had worked for many local big famous starter manufactures including Huachuan,Shendian.

One of them purchased 5pcs at the first time and then 7pcs, we can say 80% of the local starter manufacturers are using our testing device,

Our engineering team bulid this tester according to customers requirement and had much experience,

upgrade the tester gradually in past years, combine and considering starter manufacturers' feedback and new requirements,

In short word, the test items are based on starter armature manufaturers' requirements, you can depend on it for judging your armature quality,

The Armature tester WIND-ATS-02 can test armature below 36slots, so it is OK with slots from 12 up to 33 slots.

Yes, all the result is showed on screen slot by slot,

we took a video focus on the screen with a 23slots armature, please refer to attached video,

You can see on the screen 6 test items being tested one by one with 23 data come out gradually,

(1)Machine specifications

Power Supply Voltage	AC 220V, 50Hz
Air source Pressure	0.4~0.6MPa
Test cycle	8~9s (according to 33bars)
Temperature	0~45ºC
Dimension	950x1250x580mm

(2)Testing specifications

Test Items	Test Description	Test result
Bar to Bar resistance	0.01mΩ~10mΩ	≤±0.5% Full scale
Welding resistance	0.01mΩ-10mΩ	±10μΩ
180ºC cross resistance	0.01mΩ-10mΩ	≤±1.5% Full scale
Surge	100-1000Vpp (Max 36sets waveform)	±5%
Isolation resistance	DC 500V	0.1-500MΩ ≤±5% Full scale
Hipot	AC 100-1000V	0-20mA ≤±.5% Full scale

(3) Application
Suitable for auto starter armatures to do performance testing.

(4) Features
1. Bar to Bar resistance,0.01mΩ~10mΩ (Out of range display OVER)
  Four-terminal measurement to ensure accuracy
2. Welding resistance,0.001mΩ-10mΩ (Out of range display OVER)
  Six-terminal measurement to ensure accuracy
3. Cross resistance 0.01mΩ-10mΩ
  Four-terminal measurement to ensure accuracy
4.Surge 100-1000V (100V/time)
   Pulse crest:0.5u sec, Frequency 1~40MHz
   Standard waveform is Write, OK waveform is Green, NG waveform is Red
5.Isolation resistance  DC 500V
   Testing time:1~10s (0.1s/time)
   Range:1~500MΩ
   Accuracy: ≤±5%
6.Hipot AC 100-1000V
   Testing time:1~10s (0.1s/time)

(5)Machine configuration
15'' Touch screen
Sampling Chip: BB/TI (USA import)
Relay:NAIS(Japan Panasonic)
High voltage relay:Toward
Pneumatic parts: Airtac

Starter Motor Armatue Testing Machine