Rotor-Magnetic-Pole-Coil-Standing-Winder-Coil-Winding-Machine

Product Description

Rotor Magnetic Pole Coil Standing Winder Coil Winding Machine

Specification

1.Power 15KW. Table-board bearing 5T;

2.Frequency conversion timing 0~12r/min;

3.Equipped withφ2000 plate, max. load 5T, max. rotor diameter φ1240mm×1800mm;

4.The table-board center is 1150mm from the ground, on which can put the general fifixture, rotor and magnetic pole coil. Different fifixture and magnetic pole coil or rotor on the plate for electromagnetic wire winding;

5.With bidirectional clamping pneumatic paying-off rack, electric cabinet, a pair of single magnetic pole clamping tooling;

6.Max. winding electromagnetic wire section 18×4 mm2 . Only winding one wire, max. two wires duplex winding or lap winding, but the section can not exceed 18×4mm2;

7.The axis slow down, duplex chain, principal axis brakes;

8.With counting function, max. record number of turns 999;

9.Also has WIND-08AA2-1500 (2T)