Auto-Positioning-Dynamic-Armature-Balancing-Machine

Product Description

Auto Positioning Balancing Machine

This balancing machine is suitable for hard-support balancing machine. The electric cabinet of this machine is with advanced electrometrical circuit, excellent layout, and its linear and digital integrated circuit is universal series in DIP (dual in-line package). The machine takes use of touch screen, characterized by advanced technology, easy operation, maintenance and reliable performance.

(1)Feature
a. Easy operation step
b. Precisely automatic stop for positioning without marking through the measuring process.
c. Tracking the slot No. to reduce or avoid the positioning error resulting from belt sliding away. The phase tolerance by repeated measuring is within ±2.5°.
d. Only setting the armature semi-diameter r, the distance between calibrating sides b, the distance between calibrating side and support point a/c and speed parameter of stepper motor before starting the machine is ok.
e. The armature comes to support rack; the sensor switch will start the stepper motor. After the measuring, the unbalancing value for both sides will be shown on touch screen. By default, it will stop left side; operator could add the adhesive referring to the unbalancing value, then press "changing phase" to stop at right side. So does right side.

(2)Specification

(3)Maintenance
1)Electrometric box should be put in ventilated, dry and clean place. Don't allow nearby strong electromagnetic interference. Charge the machine 1-2 times per month, 1-2 hours each time on self-checking situation provided the machine is not frequently used. Cover the machine by dust-proof shield during the time out of operation. Put desiccant in the electrometric box and replace it regularly provided the machine is put in the humid area.
2)Check every index of the electrometric box and accuracy of the complete machine. Assign sole operator to keep and operate it.
3)Note: Don't adjust any potentiometer.

(4) Working station